Bearing SRW1-5ZZ AST
Various Ball Bearings online types 120 Bore Diameter (mm) and sizes to accommodate your Bearing SRW1-5ZZ AST Kate Komatsu part Machinery Co., Ltd 120x85x18 requirements.
| Bearing number: | 71917 ACE/P4AL |
| Size (mm): | 120x85x18 |
| Bore Diameter (mm): | 120 |
| Outer Diameter (mm): | 85 |
| Width (mm): | 18 |
| d: | 85 mm |
| D: | 120 mm |
| B: | 18 mm |
Product Details
| Bearing number | 71917 ACE/P4AL |
| Size (mm) | 120x85x18 |
| Bore Diameter (mm) | 120 |
| Outer Diameter (mm) | 85 |
| Width (mm) | 18 |
| d | 85 mm |
| D | 120 mm |
| B | 18 mm |
| d1 | 96 mm |
| d2 | 92.9 mm |
| D1 | 109.22 mm |
| b | 2.6 mm |
| C1 | 9.3 mm |
| C2 | 3 mm |
| C3 | 3 mm |
| r1,2 - min. | 1.1 mm |
| r3,4 - min. | 0.6 mm |
| a | 34.1 mm |
| da - min. | 91 mm |
| db - min. | 88.2 mm |
| Da - max. | 114 mm |
| Db - max. | 116.8 mm |
| ra - max. | 1 mm |
| rb - max. | 0.6 mm |
| dn | 98.6 mm |
| Basic dynamic load rating - C | 28.1 kN |
| Basic static load rating - C0 | 22 kN |
| Fatigue load limit - Pu | 0.9 kN |
| Limiting speed for grease lubrication | 13700 r/min |
| Limiting speed for oil lubrication | 21000 mm/min |
| Ball - Dw | 11.112 mm |
| Ball - z | 23 |
| Gref | 7 cm3 |
| Calculation factor - e | 0.68 |
| Calculation factor - Y2 | 1.41 |
| Calculation factor - Y0 | 0.76 |
| Calculation factor - X2 | 0.67 |
| Calculation factor - Y1 | 0.92 |
| Preload class A - GA | 255 N |
| Preload class B - GB | 765 N |
| Preload class C - GC | 1529 N |
| Calculation factor - f | 1.16 |
| Calculation factor - f1 | 0.99 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.04 |
| Calculation factor - f2C | 1.07 |
| Calculation factor - fHC | 1 |
| Preload class A | 157 N/micron |
| Preload class B | 237 N/micron |
| Preload class C | 311 N/micron |
| r1,2 min. | 1.1 mm |
| r3,4 min. | 0.6 mm |
| da min. | 91 mm |
| db min. | 88.2 mm |
| Da max. | 114 mm |
| Db max. | 116.8 mm |
| ra max. | 1 mm |
| rb max. | 0.6 mm |
| Basic dynamic load rating C | 28.1 kN |
| Basic static load rating C0 | 22 kN |
| Fatigue load limit Pu | 0.9 kN |
| Attainable speed for grease lubrication | 13700 r/min |
| Attainable speed for oil-air lubrication | 21000 r/min |
| Ball diameter Dw | 11.112 mm |
| Number of balls z | 23 |
| Reference grease quantity Gref | 7 cm³ |
| Preload class A GA | 255 N |
| Static axial stiffness, preload class A | 157 N/µm |
| Preload class B GB | 765 N |
| Static axial stiffness, preload class B | 237 N/µm |
| Preload class C GC | 1529 N |
| Static axial stiffness, preload class C | 311 N/µm |
| Calculation factor f | 1.16 |
| Calculation factor f1 | 0.99 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.04 |
| Calculation factor f2C | 1.07 |
| Calculation factor fHC | 1 |
| Calculation factor e | 0.68 |
| Calculation factor (single, tandem) Y2 | 0.87 |
| Calculation factor (single, tandem) Y0 | 0.38 |
| Calculation factor (single, tandem) X2 | 0.41 |
| Calculation factor (back-to-back, face-to-face) Y1 | 0.92 |
| Calculation factor (back-to-back, face-to-face) Y2 | 1.41 |
| Calculation factor (back-to-back, face-to-face) Y0 | 0.76 |
| Calculation factor (back-to-back, face-to-face) X2 | 0.67 |
| Mass bearing | 0.5 kg |