KOMATSU 209-62-41761 BRACKET

With over 10170 full-service stores, our KOMATSU 209-62-41761 BRACKET inventory is extensive Kate Komatsu part Machinery Co., Ltd and 38,1 Bore Diameter (mm) our parts are priced right. within 24 hours. This helps you maximize your productivity by 38.1x73.025x23.812 Size (mm) saving time 38.1x73.025x23.812 and your hard-earned dollars.

Bearing number:4T-2788/2735X
Size (mm):38.1x73.025x23.812
Bore Diameter (mm):38,1
Outer Diameter (mm):73,025
Width (mm):23,812
d:38,1 mm
D:73,025 mm
T:23,812 mm
PDF

Product Details

Bearing number4T-2788/2735X
Size (mm)38.1x73.025x23.812
Bore Diameter (mm)38,1
Outer Diameter (mm)73,025
Width (mm)23,812
d38,1 mm
D73,025 mm
T23,812 mm
B25,654 mm
C19,05 mm
a16 mm
rs min3.56 mm
r1s min0.8 mm
e0.3
Y21.98
Y01.09
Mass0.44 kg
Dynamic load, C73 kN
Rating life coefficient, A21.4
Static load, C090.5 kN
Nlim (oil)6,800 rpm
Nlim (grease)5,100 rpm
Min operating temperature, Tmin-40 °C
Max operating temperature, Tmax120 °C
Characteristic cage frequency, FTF0.42 Hz
Characteristic rolling element frequency, BSF6.34 Hz
Characteristic outer ring frequency, BPF07.22 Hz
Characteristic inner ring frequency, BPFI9.78 Hz
ra max3.5 mm
r1a max0.8 mm
CategoryBearings
Inventory0.0
Minimum Buy QuantityN/A
Weight / Kilogram0.444
Product GroupB04334
View more

Company Profile

View more

Related News

  • High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...
  • Recommended Products

    All Products Contact Now