723-57-11800/723-57-11801 VALVE, CONTROL PC130--7

723-57-11800/723-57-11801 VALVE, CONTROL PC130--7 Product Brochures , Kate Komatsu part Machinery Co., Ltd PC130 Manufacturing Service . Get Your Free. 43000 Series

Series:43000
Cone Part Number:43096
Design Units:Imperial
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:36000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:9340 lbf
d:0.9600 in
B - Cone Width:0.9478 in
PDF

Product Details

Series43000
Cone Part Number43096
Design UnitsImperial
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)136000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)29340 lbf
d0.9600 in
B - Cone Width0.9478 in
R - Cone Backface To Clear Radius30.03 in
da - Cone Frontface Backing Diameter1.56 in
db - Cone Backface Backing Diameter1.59 in
Ab - Cage-Cone Frontface Clearance0.13 in
Aa - Cage-Cone Backface Clearance0.1 in
a - Effective Center Location4-0.08 in
C90 - Dynamic Radial Rating (90 million revolutions)55360 lbf
C1 - Dynamic Radial Rating (1 million revolutions)620700 lbf
C0 - Static Radial Rating17100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)76130 lbf
K - Factor80.87
G1 - Heat Generation Factor (Roller-Raceway)16.8
G2 - Heat Generation Factor (Rib-Roller End)7.6
Cg - Geometry Factor0.0774
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us