4D102 Engine starter for car 28V 11T 4.5KW 600-863-3210 application PC60-7/PC130-7

Question4D102 Engine starter for car 28V 11T 4.5KW 600-863-3210 application PC60-7/PC130-7 165x120x22 Size (mm) ? Find Kate Komatsu part Machinery Co., Ltd what you need faster 165x120x22 by entering your 165 Bore Diameter (mm) PC130 information .

Bearing number:71924 ACD/HCP4A
Size (mm):165x120x22
Bore Diameter (mm):165
Outer Diameter (mm):120
Width (mm):22
d:120 mm
D:165 mm
B:22 mm
PDF

Product Details

Bearing number71924 ACD/HCP4A
Size (mm)165x120x22
Bore Diameter (mm)165
Outer Diameter (mm)120
Width (mm)22
d120 mm
D165 mm
B22 mm
d1133.9 mm
d2133.9 mm
D1151.1 mm
r1,2 - min.1.1 mm
r3,4 - min.0.6 mm
a44.4 mm
da - min.126 mm
db - min.126 mm
Da - max.159 mm
Db - max.161 mm
ra - max.1 mm
rb - max.0.6 mm
dn137.6 mm
Basic dynamic load rating - C72.8 kN
Basic static load rating - C086.5 kN
Fatigue load limit - Pu3 kN
Limiting speed for grease lubrication8000 r/min
Limiting speed for oil lubrication13000 mm/min
Ball - Dw14.288 mm
Ball - z28
Gref15.3 cm3
Calculation factor - e0.68
Calculation factor - Y21.41
Calculation factor - Y00.76
Calculation factor - X20.67
Calculation factor - Y10.92
Preload class A - GA450 N
Preload class B - GB900 N
Preload class C - GC1800 N
Preload class D - GD3600 N
Calculation factor - f1.26
Calculation factor - f10.98
Calculation factor - f2A1
Calculation factor - f2B1.07
Calculation factor - f2C1.12
Calculation factor - f2D1.17
Calculation factor - fHC1.04
Preload class A335 N/micron
Preload class B440 N/micron
Preload class C588 N/micron
Preload class D804 N/micron
r1,2 min.1.1 mm
r3,4 min.0.6 mm
da min.126 mm
db min.126 mm
Da max.159 mm
Db max.161 mm
ra max.1 mm
rb max.0.6 mm
Basic dynamic load rating C72.8 kN
Basic static load rating C086.5 kN
Fatigue load limit Pu3.05 kN
Attainable speed for grease lubrication8000 r/min
Attainable speed for oil-air lubrication13000 r/min
Ball diameter Dw14.288 mm
Number of balls z28
Reference grease quantity Gref15.3 cm³
Preload class A GA450 N
Static axial stiffness, preload class A335 N/µm
Preload class B GB900 N
Static axial stiffness, preload class B440 N/µm
Preload class C GC1800 N
Static axial stiffness, preload class C588 N/µm
Preload class D GD3600 N
Static axial stiffness, preload class D804 N/µm
Calculation factor f1.26
Calculation factor f10.98
Calculation factor f2A1
Calculation factor f2B1.07
Calculation factor f2C1.12
Calculation factor f2D1.17
Calculation factor fHC1.04
Calculation factor e0.68
Calculation factor (single, tandem) Y20.87
Calculation factor (single, tandem) Y00.38
Calculation factor (single, tandem) X20.41
Calculation factor (back-to-back, face-to-face) Y10.92
Calculation factor (back-to-back, face-to-face) Y21.41
Calculation factor (back-to-back, face-to-face) Y00.76
Calculation factor (back-to-back, face-to-face) X20.67
Mass bearing0.99 kg
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us