Huilian/Koko shop PC160-7 Breaker Hammer Spare Valve

With over 385 Series 10170 full-service stores, our Huilian/Koko shop PC160-7 Breaker Hammer Spare Valve inventory is extensive and 388A Cone Part Number our parts Kate Komatsu part Machinery Co., Ltd are priced right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars.

Series:385
Cone Part Number:388A
Cup Part Number:382-B
Design Units:Imperial
Bearing Weight:1.4 lb
Cage Type:Stamped Steel
d:2.2650 in
D:3.8125 in
PDF

Product Details

Series385
Cone Part Number388A
Cup Part Number382-B
Design UnitsImperial
Bearing Weight1.4 lb
Cage TypeStamped Steel
d2.2650 in
D3.8125 in
D1 - Flange Outer Diameter3.9960 in
B - Cone Width0.8640 in
C - Cup Width0.7018 in
C1 - Cup Flange Width0.1875 in
T1 - Bearing Width0.8269 in
T - Bearing Width to Flange0.3125 in
R - Cone Backface To Clear Radius10.14 in
r - Cup Backface To Clear Radius20.030 in
da - Cone Frontface Backing Diameter2.48 in
db - Cone Backface Backing Diameter2.76 in
Da - Cup Frontface Backing Diameter3.74 in
Ab - Cage-Cone Frontface Clearance0.11 in
Aa - Cage-Cone Backface Clearance0.03 in
a - Effective Center Location3-0.12 in
C90 - Dynamic Radial Rating (90 million revolutions)46280 lbf
C1 - Dynamic Radial Rating (1 million revolutions)524200 lbf
C0 - Static Radial Rating24100 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)63810 lbf
K - Factor71.65
e - ISO Factor80.35
Y - ISO Factor91.69
G1 - Heat Generation Factor (Roller-Raceway)1042
G2 - Heat Generation Factor (Rib-Roller End)15.7
Cg - Geometry Factor110.0859
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us