Excavator Hydraulic final drive For PC300-7 travel motor,207-27-00371 207-27-00441 207-27-00412 207-27-00413,207-27-00373

The online Excavator Hydraulic final drive For PC300-7 travel motor,207-27-00371 207-27-00441 207-27-00412 207-27-00413,207-27-00373 parts store gives you immediate Kate Komatsu part Machinery Co., Ltd access to a selection of 35x17x10 Size (mm) more than 35x17x10 1.4 million new, 35 Bore Diameter (mm) used, remanufactured.

Bearing number:7003 CD/P4AH
Size (mm):35x17x10
Bore Diameter (mm):35
Outer Diameter (mm):17
Width (mm):10
d:17 mm
D:35 mm
B:10 mm
PDF

Product Details

Bearing number7003 CD/P4AH
Size (mm)35x17x10
Bore Diameter (mm)35
Outer Diameter (mm)17
Width (mm)10
d17 mm
D35 mm
B10 mm
d122.6 mm
d222.6 mm
D129.3 mm
K0.5 mm
C16.05 mm
r1,2 - min.0.3 mm
r3,4 - min.0.2 mm
a8.5 mm
da - min.19 mm
db - min.19 mm
Da - max.33 mm
Db - max.33.6 mm
ra - max.0.3 mm
rb - max.0.2 mm
dn23.7 mm
Basic dynamic load rating - C6.8 kN
Basic static load rating - C03.2 kN
Fatigue load limit - Pu0.137 kN
Limiting speed for grease lubrication50000 r/min
Limiting speed for oil lubrication75000 mm/min
Ball - Dw5.556 mm
Ball - z12
Gref0.54 cm3
Calculation factor - f09.1
Preload class A - GA25 N
Preload class B - GB50 N
Preload class C - GC100 N
Preload class D - GD200 N
Calculation factor - f1
Calculation factor - f2A1
Calculation factor - f2B1.02
Calculation factor - f2C1.05
Calculation factor - f2D1.09
Calculation factor - fHC1
Preload class A19 N/micron
Preload class B26 N/micron
Preload class C35 N/micron
Preload class D50 N/micron
r1,2 min.0.3 mm
r3,4 min.0.2 mm
da min.19 mm
db min.19 mm
Da max.33 mm
Db max.33.6 mm
ra max.0.3 mm
rb max.0.2 mm
Basic dynamic load rating C6.76 kN
Basic static load rating C03.25 kN
Fatigue load limit Pu0.137 kN
Attainable speed for grease lubrication50000 r/min
Attainable speed for oil-air lubrication75000 r/min
Ball diameter Dw5.556 mm
Number of balls z12
Reference grease quantity Gref0.54 cm³
Preload class A GA25 N
Static axial stiffness, preload class A19 N/µm
Preload class B GB50 N
Static axial stiffness, preload class B26 N/µm
Preload class C GC100 N
Static axial stiffness, preload class C35 N/µm
Preload class D GD200 N
Static axial stiffness, preload class D50 N/µm
Calculation factor f1.04
Calculation factor f11
Calculation factor f2A1
Calculation factor f2B1.02
Calculation factor f2C1.05
Calculation factor f2D1.09
Calculation factor fHC1
Calculation factor f09.1
Mass bearing0.038 kg
View more

Company Profile

View more

Related News

  • High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...
  • Recommended Products

    All Products Contact Now