207-70-14280 PC300 earthmoving parts bucket tip N.W:7.1kg

Browse 207-70-14280 PC300 earthmoving parts bucket tip N.W:7.1kg LM545800 Series Categories in the Manufacturers Online Kate Komatsu part Machinery Co., Ltd Free. including pc300.

Series:LM545800
Cone Part Number:LM545848AH
Cup Part Number:LM545812
Design Units:Imperial
Bearing Weight:10.60 Kg
Cage Type:Stamped Steel
d:234.848 mm
D:317.500 mm

Product Details

SeriesLM545800
Cone Part NumberLM545848AH
Cup Part NumberLM545812
Design UnitsImperial
Bearing Weight10.60 Kg
Cage TypeStamped Steel
d234.848 mm
D317.500 mm
B - Cone Width53.975 mm
C - Cup Width36.513 mm
B49.215 mm
R - Cone Backface To Clear Radius13.560 mm
r - Cup Backface To Clear Radius23.30 mm
da - Cone Frontface Backing Diameter246.13 mm
db - Cone Backface Backing Diameter251.97 mm
Da - Cup Frontface Backing Diameter306.58 mm
Db - Cup Backface Backing Diameter296.93 mm
Ab - Cage-Cone Frontface Clearance1 mm
Aa - Cage-Cone Backface Clearance3.3 mm
a - Effective Center Location38.4 mm
C90 - Dynamic Radial Rating (90 million revolutions)435700 lbf
C1 - Dynamic Radial Rating (1 million revolutions)5138000 lbf
C0 - Static Radial Rating213000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)624300 lbf
K - Factor71.47
e - ISO Factor80.4
Y - ISO Factor91.51
G1 - Heat Generation Factor (Roller-Raceway)938.2
G2 - Heat Generation Factor (Rib-Roller End)175.8
Cg - Geometry Factor0.134
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us