PC300 PC300lc-7 servo piston assy 708-2G-03520

Request A Quote For Your Special 32013X Series PC300 PC300lc-7 servo piston assy 708-2G-03520 Needs X32013X Cone Part Number Today! Kate Komatsu part Machinery Co., Ltd Free pc300 Quotes. ISO 9001 certified.

Series:32013X
Cone Part Number:X32013X
Design Units:METRIC
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:45500 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:11800 lbf
d:65.000 mm
B - Cone Width:23.000 mm

Product Details

Series32013X
Cone Part NumberX32013X
Design UnitsMETRIC
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)145500 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)211800 lbf
d65.000 mm
B - Cone Width23.000 mm
WPD95.8 mm
DD86 mm
R - Cone Backface To Clear Radius31.520 mm
da - Cone Frontface Backing Diameter71 mm
db - Cone Backface Backing Diameter73 mm
Ab - Cage-Cone Frontface Clearance2.5 mm
Aa - Cage-Cone Backface Clearance1.5 mm
a - Effective Center Location4-0.3 mm
C90 - Dynamic Radial Rating (90 million revolutions)530100 N
C1 - Dynamic Radial Rating (1 million revolutions)6116000 N
C0 - Static Radial Rating137000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)723700 N
K - Factor81.27
G1 - Heat Generation Factor (Roller-Raceway)57.4
G2 - Heat Generation Factor (Rib-Roller End)35.6
Cg - Geometry Factor0.104
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us