PC270-8 PC200-8 PC220-8 Piston Subassembly 708-2L-33430

QuestionPC270-8 PC200-8 PC220-8 Piston Subassembly 708-2L-33430 DX513576 Cone Part Number Imperial Design Units ? Find what Kate Komatsu part Machinery Co., Ltd Stamped Steel Cage Type you need faster by entering your PC220 information .

Cone Part Number:DX513576
Design Units:Imperial
Cage Type:Stamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:378000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:98000 lbf
d:6.0000 in
B - Cone Width:2.9375 in
R - Cone Backface To Clear Radius3:0.25 in
PDF

Product Details

Cone Part NumberDX513576
Design UnitsImperial
Cage TypeStamped Steel
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1378000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)298000 lbf
d6.0000 in
B - Cone Width2.9375 in
R - Cone Backface To Clear Radius30.25 in
da - Cone Frontface Backing Diameter6.73 in
db - Cone Backface Backing Diameter7.13 in
Ab - Cage-Cone Frontface Clearance0.16 in
Aa - Cage-Cone Backface Clearance0.27 in
a - Effective Center Location4-0.59 in
C90 - Dynamic Radial Rating (90 million revolutions)556300 lbf
C1 - Dynamic Radial Rating (1 million revolutions)6217000 lbf
C0 - Static Radial Rating263000 lbf
Ca90 - Dynamic Thrust Rating (90 million revolutions)737300 lbf
K - Factor81.51
G1 - Heat Generation Factor (Roller-Raceway)606.1
G2 - Heat Generation Factor (Rib-Roller End)76.3
Cg - Geometry Factor0.116
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us