PC400-7 PC400-8 PC450-8 208-70-72170 208-70-72511 208-70-72520 BUSHING

With over 10170 full-service stores, KJP13049A Cone Part Number our PC400-7 PC400-8 PC450-8 208-70-72170 208-70-72511 208-70-72520 BUSHING inventory is extensive and our parts are priced right. JP13000 Series within 24 hours. This helps Kate Komatsu part Machinery Co., Ltd you maximize your productivity by saving time and your hard-earned dollars.

Series:JP13000
Cone Part Number:KJP13049A
Cup Part Number:KJP13010
Design Units:METRIC
Bearing Weight:2.2 Kg
Cage Type:Stamped Steel
d:130 mm
D:185.000 mm
PDF

Product Details

SeriesJP13000
Cone Part NumberKJP13049A
Cup Part NumberKJP13010
Design UnitsMETRIC
Bearing Weight2.2 Kg
Cage TypeStamped Steel
d130 mm
D185.000 mm
B - Cone Width27.000 mm
C - Cup Width21.000 mm
B29.000 mm
R - Cone Backface To Clear Radius16.100 mm
r - Cup Backface To Clear Radius23.05 mm
da - Cone Frontface Backing Diameter138.94 mm
db - Cone Backface Backing Diameter138.94 mm
Da - Cup Frontface Backing Diameter179.10 mm
Db - Cup Backface Backing Diameter171.96 mm
Ab - Cage-Cone Frontface Clearance4.6 mm
Aa - Cage-Cone Backface Clearance2 mm
a - Effective Center Location39.1 mm
C90 - Dynamic Radial Rating (90 million revolutions)465000 N
C1 - Dynamic Radial Rating (1 million revolutions)5251000 N
C0 - Static Radial Rating315000 N
Ca90 - Dynamic Thrust Rating (90 million revolutions)652600 N
K - Factor71.24
e - ISO Factor80.47
Y - ISO Factor91.27
G1 - Heat Generation Factor (Roller-Raceway)207.5
G2 - Heat Generation Factor (Rib-Roller End)64.6
Cg - Geometry Factor0.103
View more

Company Profile

Kate Komatsu part Machinery Co., Ltd
View more

Related News

  • Maintenance and management of high temperature gear pump
    High temperature gear pump is an essential equipment for polyester melt conveying, pressurization and melt metering. High temperature gear pump than other types of melt pump compact structure, reliable operation, low energy consumption, high volume...
  • Common faults and solutions of mud pump
    Fault 1: Mud pump Vibration Cause: Pump shaft and motor different heart, impeller imbalance, bearing damage. Solution: Adjust the concentric degree, leaf rotation balance test, replace the bearing. Fault 2: Pump water Slow Cause: The front...
  • Technical causes of locking between screw sleeve and axial diameter of screw pump
    First, preface My company a screw pump suddenly tripping. Maintenance personnel at the scene to the pump cause investigation and maintenance. After the demolition of the pump inspection, the reason for the trip is the copper bushing and shaft diameter...

    • Recommended Products

    All Products Contact Now
    Contact Us